Find Chain Link Fence, Galvanized Chain Link Fence, PVC Coated Chain Link Fence on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

Security Fence Systems - Expanded Metal (HP-FENCE0110)

Basic Info

Model No.:  HP-FENCE0110

Product Description

Model NO.: HP-FENCE0110 Application: Fence Mesh, Protecting Mesh, Decorative Mesh, Construction Wire Mesh, Cages Weave Technique: Fabricate Trademark: Heping Origin: Anping Material: Galvanized Iron Wire Hole Shape: Diamond Surface Treatment: Galvanized Specification: 2.7m x 50m HS Code: 7314140000
Security fencing - expanded metal 
 
Chain-Link Fence is a type of woven fence, usually made from galvanized or PVC-coated steel wire. The wires run vertically and are bent into a zig-zag pattern. This forms a characteristic diamond pattern seen in such type of fence. The popularity of Chain Link Fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain link fences are transparent and do not obscure sunlight/vision from either side of the fence. Few of the applications are as follows:
 
Private Housing.
Sports Ground
Tennis Court.
Industrial estates.
Agricultural Farms.
Gardens.
Green House.
Power Stations, Sub-Stations.
Wild-life Parks / Zoos and many more...
 
The standard mesh size is 50mm x 50mm which would be manufactured but we have considered and made available to manufacture any other mesh size depending upon the client requirement. The fence fabric either PVC or galvanized would be manufactured in various diameters as per standard market trends or to suit any specific customer requirements. We also cater the manufacture of Barbed Wire which would be either PVC or galvanized and it would be manufactured in 2-strand, 4-point barbs with the barb spacing between 75mm – 100mm or suiting any specific client requirement.
 
The fencing post and accessories enlisted as below forms the backbone of a quality fencing system. These are selected and designed specifically to suit and stand to the customer requirement and satisfaction.
 
Tension Wire: It is an essential component required for pre-stressing the fence which comes in G.I. or PVC coated G.I. wires conforming to BS-4102.
 
Stirrup Wire: It is required to fasten the tension wires. It comes as 2.0mm G.I. or 1.80/2.60mm PVC coated wires in diameter.
 
Stretcher Bar: It is required for stretching the chain-link fabric. It is made up of galvanized and/or epoxy coated, 25x5mm flat bars having holes for fixing the barbed wire-lines.
 
Turn Buckle: These are galvanized straining devices used in M6 or M8 sized which is required for tensioning the Tension / Barbed wires at Tension Posts.
 
Line Posts: These are made from BS-4360 &; BS4 standard equal angles having flange size 40x40, 50x50, 65x65 &; 75x75 or from galvanized hollow sections as per BS-1387 having outer diameters of 48.3, 60.3, 76.1 &; 88.9mm, the selection of which depends upon the type &; height of the fencing.
 
Strainer, Corner &; End Posts (Tension Posts): These are made from standard equal angles of flange sizes 50x50, 65x65, 75x75, 100x100 or from galvanized hollow circular sections having outer diameters of 60.3, 76.1, 88.9 &; 114.3, the selection of which depends upon the length &; type of fencing.
 
Support Braces: Two braces along the fence are run bolted on each side of the strainer posts which are made up of angles or galvanized circular hollow sections.
 
Top Security Razor Wire: 600mm coil diameter, blade length choice BTO30, CBT60, 65.

Contact us if you need more details on High Security Fencing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Security Fencing、Perimeter Security Fence. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Chain Link Fence